Settings
Settings mode
In the settings mode, you can change and adjust various settings according to your own preferences.

Start the settings mode
In stop mode, press the Right function button
to open the settings panel.
Press the Record button to select All settings.
Select a setting
Press the Record button.
Recording settings

Scene
Select a scene according to specific recording situations, e.g. a lecture or an interview. Every scene has predefined settings, such as the format or the microphone sensitivity, that cannot be changed. If you would like to change the settings of a scene, you need to select the scene Custom where you can define each setting according to your own preferences.
Format
Select the format of your recording according to specific recording situations.
Mic sensitivity
Adjust the microphone sensitivity of your VoiceTracer. Select the sensitivity according to the background noise, number of recorded sound sources and distance between sound source and microphones.
Limiter
Activate this function to prevent recordings from being oversteered by sound input over the maximum sound level. If the recording suddenly exceeds the maximum sound level, the microphone sensitivity is automatically reduced.
Noise cut
Turn the Noise cut feature on in order to reduce background noise while recording. This way, especially audio recordings sound clearer.
Wind filter
Activate the wind filter to reduce wind noise when you are recording in a very windy environment.
Folder
Select the folder you want your recording to be saved in.
Voice activation
Use voice activation to start recording when you begin speaking. When you stop speaking, the device will automatically pause recording after three seconds of silence. It will resume only when you begin speaking again.
Edit mode
Select what should happen when you edit a recording.
Pre-recording
When the pre-recording function is enabled, the device will start recording some seconds prior to the event.
Timer
Use the timer function to automatically start recording on a preset date and at a preset time. You can also select when the recording should stop.
Auto divide
During recording, the auto divide feature will automatically split the current recording and save a new file every 15, 30 or 60 minutes.
Auto bookmark
Use the Auto bookmark funktion to automatically set bookmarks at preset time intervals.
External input
Choose between various input sources to guarantee the best recording quality for specific recording situations.
Playback settings

Play mode
Choose between various playback options.
Equalizer
Choose between the equalizer music options Classical, Jazz, Pop, or Rock.
ClearVoice
Activate the ClearVoice function for better playback quality. Dynamic emphasis on quiet passages improves the intelligibility of quiet voices.
Device settings

Language
Select your desired device language from the language list. You can change the language whenever you want.
Brightness
Adjust the brightness of your screen acccording to your own requirements.
Backlight
To save your VoiceTracer’s battery power, you can reduce the backlight time. If you don’t operate your device for the preset time, the backlight turns off automatically.
Date & time
You can always change the system date and time on your device. Use the Backward, Forward, Up, and Down buttons to set the date and time.
Recording light
If you turn on the recording light, the Record/Status LED will illuminate red when recording.
Auto Off
Select a time for your device to automatically turn off when you don’t operate it.
Device sounds
Select if you want the device sounds, such as key tone and power on/off sound, to be turned on or off.
Format storage
Use this function to format your device’s internal storage and delete all data. For more information, see Reset data.
Reset settings
You can reset your menu settings to their default state—the way they were when you first purchased your device and turned it on. For more information, see Reset settings.
Information
See various information about your device, such as the available memory space or the firmware version.