AirBridge

Connect your AirBridge

SpeechOne

  1. Connect the AirBridge to your computer.

    airbridge_connect-to-computer.png

    Note

    Do not use any extension cables to connect the AirBridge to your computer to avoid connection problems.

  2. Hold the Pairing button of your AirBridge for 3 seconds.

    airbridge_hold-button.png
  3. The status LED of your AirBridge starts to flash orange.

    airbridge_connection-orange-led.png
  4. Hold the Pairing button of your SpeechOne for 3 seconds.

    speechone_hold-buttons.png

    Note

    Make sure to turn on your SpeechOne headset by pressing the Headset button for 2 seconds.

    press-headset-button.png
  5. The status LED of your SpeechOne headset starts to flash orange.

    speechone_connection-orange-led.png
  6. The SpeechOne headset automatically connects to the AirBridge. Once successfully connected, the status LED of both devices illuminates green.

    airbridge_connection-green-led.png
    speechone_connection-green-led.png

    X Once paired with the AirBridge, the SpeechOne headset will automatically reconnect to this AirBridge without the need for a manual pairing process.

Note

The SpeechMike / SpeechOne only stores the last two connections, e.g. to the last docking station and the AirBridge it was connected to. If you connect your SpeechMike / SpeechOne to an additional docking station or AirBridge, only the two most recent connections are stored.

Caution

Unplug the AirBridge from laptops or other portable computers before transport to avoid any damages to the AirBridge or the computer.

Power down your SpeechOne

If the SpeechOne is not used for more than 6 hours, it automatically turns off to save battery life. You can also power down your SpeechOne manually:

  1. Remove the headset from the docking station.

  2. Hold the Pairing button of your SpeechOne headset for 9 seconds.

    speechone_hold-buttons5-sec.png
  3. The status LED of your SpeechOne headset is no longer illuminated, indicating that you turned off the device.

    speechone_connection-no-led.png

    To turn the device on again, press the Headset button for 2 seconds.

    press-headset-button.png

SpeechMike Premium Air

  1. Connect the AirBridge to your computer.

    airbridge_connect-to-computer.png

    Note

    Do not use any extension cables to connect the AirBridge to your computer to avoid connection problems.

  2. Hold the Pairing button of your AirBridge for 3 seconds.

    airbridge_hold-button.png
  3. The status LED of your AirBridge starts to flash orange.

    airbridge_connection-orange-led.png
  4. Hold both the F1 and F2 button of your SpeechMike for 3 seconds.

    speechmike_hold-buttons.png
  5. The status LED of your SpeechMike headset starts to flash orange.

    speechmike_connection-orange-led.png
  6. The SpeechMike automatically connects to the AirBridge. Once successfully connected, the status LED of both devices illuminates green.

    airbridge_connection-green-led.png
    speechmike_connection-green-led.png

    X Once paired with the AirBridge, the SpeechMike will automatically reconnect to this AirBridge without the need for a manual pairing process.

Note

The SpeechMike / SpeechOne only stores the last two connections, e.g. to the last docking station and the AirBridge it was connected to. If you connect your SpeechMike / SpeechOne to an additional docking station or AirBridge, only the two most recent connections are stored.

Caution

Unplug the AirBridge from laptops or other portable computers before transport to avoid any damages to the AirBridge or the computer.