V4.xx is valid for SMP4000, SMP4010
V4.30 technical release 2017-10-30
Initial
version
V4.32 technical release 2017-12-22
-
Mobile device is now
also charged when battery voltage is very low
-
Pairing with a new mobile
device is now reliable even after a quick exchange (< 4sec) with the old
mobile device
-
The problem with
occasional recording of distorted noise has been fixed
-
Modification of data
handling in the USB part to avoid problems where the SMPA was not recognized as
an audio device
-
Changes to the default
settings of the Gamepad/Browser mode
V4.33 technical release 2018-01-30
-
Fixed a problem which
could cause the first recording containing only loud noise after powering up
the docking station
-
Fixed the case of a
permanently buzzing mobile device when ending a recording during a bad
connection
-
Updating the device
settings with PDCC could cause a permanently muted microphone, when a
microphone event was assigned to a button in browser mode, even
when the browser mode was not active. This behaviour has been fixed in this
version.
-
Fixed a playback
distortion problem, when playback was continuously running for more than 30
minutes
-
SMPA was not recognized
on a Macbook after returning out of sleep mode. Fixed
in this version
V4.50 technical release 2018-09-07
Introduction
of additional custom keyboard modes:
Custom
1 mode: Windows speech recognition (for Windows OS only)
Custom
2 mode: Dragon Dictate speech recognition (for Mac OS only)
Custom 3 mode: Dragon speech
recognition (for Windows OS only)
Introduced a ‘trickle-charging’ mode
to handle charging of deeply discharged batteries.
Replaced the flashing red connection
LED with a permanently lit orange connection LED in accordance with customer
requests.
Removed low voltage warning buzzer
sound to avoid confusion with ‘no connection’ warning.
The ‘wake-up’ beep can be disabled
by the ‘Enable acoustical warning’ settings.
Fixed a problem, where the mobile
device will not wake up when in a low-power mode.
V4.62 technical release 2019-03-29
-
Headset can be paired
with AirBridge and remembers up two pairing partners
for ease of use
-
Implementation of a
current limiter for the footswitch plug-in
-
Fixed a problem caused
by a lost connection to the mobile device when establishing a USB connection to
the PC host
V4.63 technical release 2019-04-05
-
Haptic feedback
(‘buzzer’), indicating a low-quality connection, is supressed.
V4.65 technical release 2019-05-28
-
Introduction of the new
‘charging only’–mode: When the handset is connected to an Airbridge (FW1.10 and
higher) and placed into a powered docking station, it will shortly interrupt
its connection to the Airbridge, but automatically reconnect to the Airbridge
when the docking station is not (also) powered by the USB plug-in.
- Fixed a problem (JIRA SO-91),
where the mouse cursor was dragged to the upper left corner of the screen after
the mobile device woke up from idle mode.
V3.66
technical release 2020-07-15
-
The current microphone
recording level is properly reported to the USB host now. This is essential for
the latest Windows 10 version.
-
FW-update is also
possible with an active playback channel.