Skip to main content

Philips hardware integration guide for web-based apps

Browser mode

To enable the Browser mode on your SpeechMike proceed as follows:

  1. Press EOL and INS/OVR simultaneously for 3 seconds.

  2. All corresponding LEDs will start flashing. You can now change the SpeechMike button mode for 10 seconds.

  3. Click on F3 to switch your SpeechMike to Browser mode. The F3-LED will light up to confirm the new button mode setting.

SpeechMike-Browser-mode_640.png

Note

  • You have 10 seconds to select a mode. After 10 seconds, you will automatically exit mode selection and need to restart the mode selection steps.

  • You can always check your current button mode by briefly pressing the End-of-letter/priority (•EoL/••Prio) button and the Insert/overwrite (INS/OVR) button simultaneously.

  • The LED assigned to the current mode shortly lights up orange, e.g. if the currently activated mode is the Browser mode, the LED of the F3 button lights up orange.

  • If the displayed mode does not match the Browser mode please change the mode as described above.